Control Panel Schedules | en 217
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
No. The user cannot edit the time of this Sked from the keypad, and it does not appear in
the CHANGE SKED displays.
Select whether the user can edit the time of this Sked from the keypad.
RPS Menu Location
Schedules > Skeds > Time Edit
11.3.4 Function
Default: Not in Use
Selections: See list of Sked functions below.
Select the function name from the drop down list that you want this Sked to execute.
RPS automatically displays the available parameter choices and range fields for this function.
(e.g. A list of check boxes are automatically displayed for the areas when choosing the arm/
disarm function.
Notice!
The All On - No Exit feature is ignored when arming from a SKED.
Click on a function name for information about that function.
Not In Use - This function is disabled and no functions after this will be performed.
All On Delay, page 219
All On Instant, page 220
Part On Delay, page 220
Part On Instant, page 220
Disarm, page 220
Extend Close, page 220
Bypass a Point, page 220
Unbypass a Point, page 220
Unbypass All Points, page 220
Reset Sensors, page 220
Turn Output On, page 220
Turn Output Off, page 221
Toggle Output, page 221
One-Shot Output, page 221
Reset All Outputs, page 221
Delay, page 221
Cycle Door, page 221
Unlock Door, page 221
Lock Door, page 221
Secure Door, page 221
Access Ctrl Level, page 221
Access Granted Events, page 222
Access Denied Events, page 222
Answer RPS, page 222
Contact RPS, page 222
Contact RPS User Port, page 222
Send Status Report, page 222
Send Test Report, page 223
Send Test on Off Normal, page 224
To Next Page
Loading...
