EasyManua.ls Logo

Bosch B9512G - Group Enable Time; Group Disable Time; Xept Holiday

Bosch B9512G
284 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Control Panel Schedules | en 215
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
RPS Menu Location
Schedules > User Group Windows > Sunday through Saturday
Additional Information
Xept Holiday, page 215
11.2.3 Group Enable Time
Default: Disable
Selections:Disable, HH:MM (hours and minutes)
Enter the time of day that the window starts. Beginning at this time, users assigned to this
window's group are allowed to use their passcodes. The window goes into effect at the
beginning of the minute.
Notice!
This parameter must be programmed if this User Group Window is assigned to a user group.
Make entries using a 24-hour clock (for example, 2:45 PM is entered as 14:45).
When disabling Group Enable Time input, the time reverts back to 00:00.
Perform a Reset Panel command when ending the communications session to activate today's
window. If you are programming a window that needs to activate on the same day that you are
programming it, do a Reset Panel command after programming.
RPS Menu Location
Schedules > User Group Windows > Group Enable Time
11.2.4 Group Disable Time
Default: Disable
Selections:Disable, HH:MM (hours and minutes)
Enter the time of day when the window ends. This time marks the end of the period in which
users assigned to this window's group can use their passcodes. The window stops at the end
of the minute.
Notice!
This parameter must be programmed if this user group window is assigned to a user group.
Make entries using a 24-hour clock. For example, 2:45 PM = 14:45.
To disable the window, both the hours and minutes spaces must be blank.
Do not program a single window to cross the midnight boundary. The window stop time must
be later than the window start time.
RPS Menu Location
Schedules > User Group Windows > Group Disable Time
11.2.5 Xept Holiday
Default:No
Selections:Yes/No
This parameter allows you to determine if the window is disabled on holidays, or is active only
on holidays. Use the instructions provided in Xept Holiday.
RPS Menu Location
Schedules > User Group Windows > Xept Holiday

Table of Contents

Other manuals for Bosch B9512G

Related product manuals