Bosch B9512G - Address

Control Panel Shortcut Menu | en 131
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
Selections: Address 1-32
Use this parameter to quickly enable or disable a selected function number at all available
addresses or select set several addresses at once without the need to set each one
individually.
Any changes you make in the Set/Clear All window also appear in the specific keypad Address
# cell. For example, if you check the boxes for Address 1 and Address 2 in the Set/Clear All
Address window, the cells for Address 1 and Address 2 change to show Yes. Likewise, if you
change any of the Address #, page 131 cells individually, those changes appear in the Set/Clear
All Address window.
RPS Menu Location
Shortcut Menu > Set/Clear All
7.3 Address #
Default: Yes (Shortcut Menu 1 to 8)
Selections:
– Yes - this menu item appears at this keypad address.
– No - this menu item does not appear at this keypad address.
This parameter determines at which keypad address setting this menu item appears.
Any changes you make in the Set/Clear all, page 130 window also appear in the specific keypad
Address # cell. For example, if you check the boxes for Address 1 and Address 2 in the Set/
Clear All Address window, the cells for Address 1 and Address 2 change to show Yes.
Likewise, if you change any of the Address # cells individually, those changes appear in the
Set/Clear All Address window.
RPS Menu Location
Shortcut Menu > Address # (B6512: 1 to 12, B5512, B4512: 1 to 8, B3512: 1 to 4)
Shortcut Menu > Address # (B9512: 1 to 32, B8512: 1 to 16)