Bosch B9512G - RADION Keyfob RFID (B810); Supervised; User Language

148 en | User Configuration Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
identify what device is transmitting. Duplicate ID detection must be based on the RFID value
stored in configuration memory, not on the number printed on the device. Inovonics keyfobs
are not supervised when assigned to a user.
Notice!
After you Send Updates to Panel, the control panel does not download the RFIDs to the
receiver until you disconnect RPS.
Note: To expand or collapse the list of users, use the arrows at the top of the RPS screen.
RPS Menu Location
User Configuration > User Assignments > Keyfob RFID (B820 Inovonics Wireless)
9.1.9 RADION Keyfob RFID (B810)
Default: 0
Selections: 0, 11 - 167772156
Use this feature to assign each user a wireless keyfob RFID (Radio Frequency device
Identification number). A RADION keyfob RFID is Auto-Learned through the SDI2 bus RF
receiver. Alternatively, enter the RFID manually here.
Youcan edit auto-Learned RFIDs for RADION keyfob replacement, or set the parameter to 0 to
disable a user’s RADION keyfob. An RFID is a unique number assigned to a wireless device at
the factory. It provides a unique way for the wireless receiver and wireless repeaters to
identify what device is transmitting. Duplicate ID detection is based on the RFID value stored
in configuration memory, not on the number printed on the device.
Notice!
After you Send Updates to Panel, the control panel does not download the RFIDs to the
receiver until you Disconnect RPS from the Control Panel.
Note: To expand or collapse the list of users, use the expand / collapse icons at the top of the
RPS screen.
RPS Menu Location
User Configuration > User Assignments > Keyfob RFID (B810 RADION Wireless)
9.1.10 Supervised
Default: No
Selections:
– Yes - the RADION keyfob assigned to this user is supervised.
– No - the RADION keyfob assigned to this user is not supervised.
When this parameter is set to Yes to supervise the RADION keyfob assigned to this user, the
control panel creates a missing event when the keyfob is moved out of range of the RADION
receiver.
The supervision interval for keyfobs is 4 hours. Keyfobs must be out of range of the receiver
for 4 hours before the panel creates the missing event.
Inovonics keyfobs are not supervised.
RPS Menu Location
User Configuration > User Assignments > Supervised
9.1.11 User language
Default: 1: (language programmed as first language in Panel Data window)