Bosch B9512G - View Event Log; User Command 7; Bypass a Point; Unbypass a Point

154 en | User Configuration Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
The window cannot be adjusted until the Close Early Begin time has passed and the closing
window is active.
RPS Menu Location
User Configuration > User Keypad Functions > Extend Close
9.3.19 View Event Log
Default:E
Selections: - , E, P
– Disable (-) - Disable this function panel wide regardless of the user's authority level.
– Enable (E) - Enable this function panel wide without requiring a passcode.
– Passcode (P) - Require a passcode to enable this function panel wide.
This function allows the user to view the event log.
RPS Menu Location
User Configuration > User Keypad Functions > View Event Log
9.3.20 User Command 7
Default:P
Selections: - , E, P
– Disable (-) - Disable this function panel wide regardless of the user's authority level.
– Enable (E) - Enable this function panel wide without requiring a passcode.
– Passcode (P) - Require a passcode to enable this function panel wide.
This parameter enables or disables the User Command 7.
RPS Menu Location
User Configuration > User Keypad Functions > User Command 7
9.3.21 User Command 9
Default:P
Selections: - , E, P
– Disable (-) - Disable this function panel wide regardless of the user's authority level.
– Enable (E) - Enable this function panel wide without requiring a passcode.
– Passcode (P) - Require a passcode to enable this function panel wide.
This parameter enables or disables the User Command 9.
RPS Menu Location
User Configuration > User Keypad Functions > User Command 9
9.3.22 Bypass a Point
Default:P
Selections: - , E, P
– Disable (-) - Disable this function panel wide regardless of the user's authority level.
– Enable (E) - Enable this function panel wide without requiring a passcode.
– Passcode (P) - Require a passcode to enable this function panel wide.
This function bypasses individual points in areas within the Scope of the keypad.
Bypassed points do not create alarm or trouble events.
RPS Menu Location
User Configuration > User Keypad Functions > Bypass a Point
9.3.23 Unbypass a Point
Default:P
Selections: - , E, P
– Disable (-) - Disable this function panel wide regardless of the user's authority level.