Bosch B9512G - Output Reports; Auto Function Reports

Control Panel Panel Wide Parameters | en 55
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
Diagnostic Reports
Route Group 1 Route Group 2 Route Group 3 Route Group 4
Equipment Fail Restore Yes Yes Yes No
Service Smoke Detector Yes Yes Yes No
Service Smoke Detector
Restore
Yes Yes Yes No
Personal Notification
Communication Trouble
No No No No
Personal Notification
Communication Trouble
Restore
No No No No
Send Version Text Yes Yes Yes Yes
Selections:
– Yes - assign this report to the Route Group.
– No - do not assign this report to the Route Group.
Notice!
Enable Route Comm Fail and Rout Comm Restore reports in only one route group.
RPS Menu Location
Panel Wide Parameters > Report Routing > Diagnostic Reports.
3.9.8 Output Reports
Default:
Output Reports
Route Group 1 Route Group 2 Route Group 3 Route Group 4
Sensor Reset Yes Yes Yes No
Output Set Yes Yes Yes No
Output Reset Yes Yes Yes No
Send Output Name Text Yes Yes Yes Yes
Selections:
– Yes - assign this report to the Route Group.
– No - do not assign this report to the Route Group.
RPS Menu Location
Panel Wide Parameters > Report Routing > Output Reports.
3.9.9 Auto Function Reports
Default:
Auto Function Reports
Route Group 1 Route Group 2 Route Group 3 Route Group 4
Sked Executed Yes Yes Yes No