Control Panel SDI2 modules | en 255
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
The Radio Frequency device Identification number (RFID) is a unique number assigned to a
wireless device at the factory. Since the Wireless Repeater is a receiver as well as a
transmitter it also is assigned an RFID so that the Wireless Receiver can determine what
Repeater is transmitting.
This RFID number is located on the label that is affixed to the device. The label location might
differ for each RF device.
RADION supports up to 1000 keyfobs. Keyfobs can be assigned to any user # between 1-2000,
but cannot exceed more than 1000 devices in total.
RPS Menu Location
SDI2 Modules > Wireless Repeater > RFID (B810 RADION Wireless)
14.8.3 Inovonics RFID (B820)
Default: N/A
Range: 0 - 99999999
This parameter provides a unique way for the Wireless Receiver and Wireless Repeaters to
identify what device is transmitting.
The RFID (Radio Frequency device Identification number) is a unique number assigned to a
wireless device at the factory. Since the Wireless Repeater is a receiver as well as a
transmitter it also is assigned an RFID so that the Wireless Receiver can determine what
Repeater is transmitting.
This RFID number is located on the label that is affixed to the device. The label location might
differ for each RF device.
RPS Menu Location
SDI2 Modules > Wireless Repeater > RFID (B820 Inovonics Wireless)
To Next Page
Loading...
