258 en | Hardware switch settings Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
B94x Touch Screen Keypad address switch settings
To set the address, use the up and down arrows on the right of the switches image to change
the ones digit, and the arrows on the left to change the tens digit. Press the diagonal arrow
under the switches to save the setting and return to the power up screen.
15.2 B208 Octo-input Module switch settings
This table describes the relationship between the module switch settings and the point
address range that corresponds to the setting. The values of point range listed in this table
references back to POINTS > Point Assignments.
The B9512G supports up to 59 B208 Octo-input modules.
The B8512G supports up to 9 modules.
Terminate unused B208 inputs with an EOL resistor.
B208 address number B9512G point numbers B8512G point numbers
1 11 - 18 11 - 18
2 21 - 28 21 - 28
3 31 - 38 31 - 38
4 41 - 48 41 - 48
5 51 - 58 51 - 58
6 61 - 68 61 - 68
7 71 - 78 71 - 78
8 81 - 88 81 - 88
9 91 - 98 91 - 98
10 101 - 108
11 111 - 118
12 121 - 128
13 131 - 138
14 141 - 148
15 151 - 158
16 161 - 168
17 171 - 178
18 181 - 188
19 191 - 198
20 201 - 208
21 211 - 208
22 221 - 228
To Next Page
Loading...
