Bosch B9512G - Burglar Reports; Personal Emergency Reports

52 en | Panel Wide Parameters Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
Gas Reports
Route Group 1 Route Group 2 Route Group 3 Route Group 4
Gas Supervision Missing Yes Yes Yes No
Gas Supervision Restoral Yes Yes Yes No
Selections:
– Yes - assign this report to the Route Group.
– No - do not assign this report to the Route Group.
RPS Menu Location
Panel Wide Parameters > Report Routing > Gas Reports.
3.9.3 Burglar Reports
Default:
Burglar Reports
Route Group 1 Route Group 2 Route Group 3 Route Group 4
Alarm Report Yes Yes Yes Yes
Burg Restore (after Alarm) Yes Yes Yes No
Duress Yes Yes Yes Yes
Missing Alarm Yes Yes Yes No
User Code Tamper Yes Yes Yes No
Trouble Report Yes Yes Yes No
Missing Trouble Yes Yes Yes No
Non-Fire Supervision Yes Yes Yes No
Point Bus Fail Yes Yes Yes No
Point Bus Restoral Yes Yes Yes No
Non-Fire Cancel Yes Yes Yes No
Alarm Restore Yes Yes Yes No
Supervision Missing Yes Yes Yes No
Unverified Event Yes Yes Yes No
Selections:
– Yes - assign this report to the Route Group.
– No - do not assign this report to the Route Group.
RPS Menu Location
Panel Wide Parameters > Report Routing > Burglar Reports.
3.9.4 Personal Emergency Reports
Default:
Personal Emergency Reports Route Group 1 Route Group 2 Route Group 3 Route Group 4
Medical Alarm Yes Yes Yes Yes
Medical Alarm Restoral Yes Yes Yes No