Bosch B9512G - Page 5

Control Panel Table of contents | en 5
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
3.12.3 RPS Address Verification 68
3.12.4 RPS Network Address 68
3.12.5 RPS Port Number 68
3.13 Power Supervision 69
3.13.1 AC Fail Time 69
3.13.2 Resend AC Fail 69
3.13.3 AC Fail Display 69
3.13.4 AC Fail / Restoral Report 69
3.13.5 AC Tag Along 70
3.13.6 AC / Battery Buzz 70
3.13.7 Battery Fail / Restoral Report 70
3.14 RPS Parameters 71
3.14.1 RPS Passcode 71
3.14.2 Log % Full 71
3.14.3 Contact RPS if Log % Full 71
3.14.4 RPS Call Back 72
3.14.5 RPS Line Monitor 72
3.14.6 Answer Armed 73
3.14.7 Answer Disarmed 73
3.14.8 RPS Phone # 73
3.14.9 RPS Modem Speed 74
3.15 Miscellaneous 74
3.15.1 Duress Type 74
3.15.2 Cancel Reports 75
3.15.3 Call for Service Text - First Language 75
3.15.4 Call for Service Text - Second Language 75
3.15.5 On Site Authorization for Firmware Update 76
3.15.6 Enclosure Tamper Enable 76
3.15.7 Fire Summary Sustain 77
3.15.8 Fire Supervision Event Type 77
3.15.9 Fire Trouble Resound 77
3.15.10 Fire Drill Duration 78
3.15.11 Early Ambush Time 78
3.15.12 Second Ambush Code 78
3.15.13 Abort Window 78
3.15.14 Passcode Length 79
3.15.15 Swinger Bypass Count 80
3.15.16 Remote Warning 81
3.15.17 Crystal Time Adjust 81
3.15.18 Part On Output 81
3.15.19 Early Area Armed Output 81
3.15.20 Daylight Saving Time 82
3.15.21 Date Format 82
3.15.22 Date Delimiter 82
3.15.23 Time Format 82
3.15.24 Time Zone 83
3.15.25 SDIx Connector Protocol 85
3.15.26 Ground Fault Detection 85
3.16 Personal Notification Destinations 85