Bosch IRIS-Net - Page 514

The N8000 provides the following macro types:
– Amplifier Power
– Set Amplifier Preset
– Digital Output
– Remote Macro
– User Fault
– Sequence
– Paging Line
– Save Amplifier Preset
– Load Preset
– Set Level From GPI
– Save N8000 Preset
Amplifier Power: Execution of this macro switches power amps on or off. Amps specified in the amplifier list as
"Amplifier X" represent remote amps with CAN address ”X” that are connected to the CAN bus.
IRIS-Net
DIGITAL MATRIX | en 514
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956