Element Description
Factory / User Switch between the Factory Presets or User Presets.
1-10, 11-20, 21-30, ... Select the preset group that should be listed.
U01...U10 Press the button of the preset, that should be assigned to the input.
DSP
The DSP pages provide overview and access to all DSP parameters of the sound system processor. Within this window
you can use the Flow Diagram Selector to link to different function groups.
Element Description
The current preset is in Edit mode if the yellow EDIT button is indicated. Pressing
the EDIT button „compares“ the edited preset, if parameters have been altered, to
the original unedited preset. This compare function will audibly switch between
the altered parameters and the previously stored settings, allowing you to hear
the effect of any DSP changes that have been made. Use this feature to monitor
progress in editing or creating presets. Subsequently recalling a new preset will
prompt you to save changes, which you may do or not.
FLOW DIAGRAM SELECTOR
The Flow Diagram Selector can be accessed from any DSP page offering navigation means within the DSP signal
processing functions. The Flow Diagram Selector lets you select different function blocks, where the actually selected
block is displayed in a light grey engaged field.
A short description of each DSP page is provided in the following table. Please refer to the corresponding chapters for
a more detailed explanation.
IRIS-Net DIGITAL SOUND PROCESSOR | en 656
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
Need help?
General
