Element Description
INV Press the INV button to invert the status of all relays in
the topology.
Press this button to minimize or maximize the zones or
relays dialog.
+Prio Press this button to add a priority relays to the zone.
Note: Up to 5 priority relays can be configured in a zone.
+Cont Press this button to add a control relays to the zone.
Note: Up to 5 control relays can be configured in a zone.
X Press this button to delete the corresponding zone or
relay.
This combo box lists all available relays of DCS or DPA
devices in the PROMATRIX 8000 system.
Enter a name for the zone.
This control allows setting the priority value of a priority
relay.
DIRECT AB
Element
Description
Name Name of topology
Type This combo box lists all type of topologies that can be created in the Promatrix 8000
system.
Number Of Zones Number of zones to be created in the selected topology.
IRIS-Net PROMATRIX 8000 | en 781
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956