Bosch IRIS-Net - Page 805

Input Channel Enter the audio input at which the externally generated alarm signal is present.
Active when
locked
Selecting this checkbox allows the user to press the button even though the call station has been
locked.
Chime Key
A switch of the type "Chime Key" allows the launch of a gong (chime) signal in the system.
Element
Description
Destination Clicking onto the button „..." opens the Destinations Dialog for selecting desired Zones and/or
Groups.
Priority Select the chime priority (0 to 100).
Chime Type Select the desired type of gong (chime) signal. The list includes default signals and chime signals
uploaded to the MM-2 module (if available). Following default signals are available:
– 1-Tone
– 2-Tone
– 3-Tone
– 4-Tone
– 2x2-Tone
– 2-Tone Pre-Chime
Active when
locked
Selecting this checkbox allows the user to press the button even though the call station has been
locked.
On Key
A switch of the type “On” allows switching the PROMATRIX 8000 system on or off (standby) using a button of the call
station.
IRIS-Net
PROMATRIX 8000 | en 805
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956