Trigger Type Select the desired functionality for a button on a call station; available are:
– Push (pushbutton)
– Toggle (switches between two states)
– Trigger
Message Name Select the message by name. If the voice alarm recording feature of the device is activated
(PAVIRO or Promatrix 6000 only) the recorded messages are available with description
“Recorded message”
Active when locked Selecting this checkbox allows the user to press the button even though the call station has
been locked.
Loop Select this checkbox to automatically repeat the selected message.
System Fault Ack/Res
A switch of the type “System Fault Ack/Res” allows to acknowledge or reset a system fault that is indicated at the call
station. This type can be assigned to the DEL button (or an optional Alarm button) only.
Indicator Test Key
A switch of the type “Indicator Test” allows for the start of the LED and Buzzer test on the CST. Only one key of this
type can be configured on a CST.
Element
Description
Trigger Type Select the desired functionality for a button on a call-station; available are:
– Push (pushbutton)
– Toggle (switches between two states)
Active when locked Selecting this checkbox allow the user to press the button even though the call station has
been locked.
Diagnostics
The diagnostics dialog is used for supervision of the call station.
IRIS-Net PROMATRIX 8000 | en 807
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
Need help?
General
