The Announcement block is used to trigger an announcement. Double click the block to edit the
announcement settings (see screenshot below).
– PRIORITY: Priority of the announcement (0 to 100).
– PRECHIME TYPE: Select the pre chime (see table below). Select NO, if there should be now
pre chime
– INPUT CHANNEL: Select the input channel of the device, where the announcement signal is
present.
– DESTINATIONS: Select the destination zone(s) or group(s) for the announcement.
IRIS-Net PROMATRIX 6000 | en 856
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956