Bosch IRIS-Net User Manual

Element Description
POWER ON/OFF SIGNAL Select the GPO contact or the virtual TE value for signaling the
controllers’ operating mode. In standby mode the GPO is open.
EXTERNAL ON/STANDBY Select the digital GPI or virtual TE value to be used for switching to
standby mode.
POWER SUPPLY STATUS
MAINS POWER Select the digital GPI or virtual TE value that is used for signaling
„mains power OK“. Set the checkbox to monitor this status.
BATTERY POWER Select the digital GPI or virtual TE value that is used for signaling
„battery power OK“. Set the checkbox to monitor this status.
CHARGER STATUS Select the digital GPI or virtual TE value that is used for signaling
„charger status OK“. Set the checkbox to monitor this status.
BATTERY 90% Select the digital GPI or virtual TE value that is used for signaling
„battery status at least 90%“. Set the checkbox to monitor this status.
PERIPHERAL DEVICE STATUS Set the checkbox to monitor the status of peripheral devices..
COMBINED POWER STATE This LED is green, if all selected power supply status are OK.
SYSTEM OPERATION MODE
& CST TEXT
IRIS-Net PROMATRIX 6000 | en 873
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956

Bosch IRIS-Net Specifications

General

Brand	Bosch
Model	IRIS-Net
Category	Security System
Language	English