Brother MFC-7450

App. 1-54
Confidential
<WSW49>
• Selectors 4 and 5: Command flag detection time
After receiving a command flag, the machine will wait for the command that should follow
for the time length specified by these selectors.
• Selectors 8: Print in black (Not used.)
If any of the color inks have been deleted ("out of ink"), no printing can occur by default. If
this selector is set to "1," in cases of "out of ink" data will be printed only in black ink.
However, in such circumstances, no color data will be printed.
Selector No. Function Setting and Specifications
1
2
RAM disc size in PCL/ PS
No. 1 2
00: None
01: 1MB
10: 2MB
11: 4MB
3 End-of-copying beep 0: Yes 1: No
4
5
Command flag detection time
No. 4 5
0 0: 150 ms
0 1: 350 ms
1 0: 550 ms
1 1: 750 ms
6
7
CCD unit warm-up time
adjustment (Not used.)
No. 6 7
0 0: Not adjusted
0 1: 80 %
1 0: 120 %
1 1: 150 %
8 Print in black (Not used.) 0: No (Default) 1: Yes