Brother MFC-7450 - Page 302

App. 1-63
Confidential
<WSW59>
• Selector 1: Frame length selection
This is intended to prevent the problem of a continued increase in USB ports when serial
numbers are transmitted from the MFC to a Windows Vista-based PC.
It is intended only to prevent a problem specific to Windows Vista; its default setting is "0:
USB SN enabled."
• Selector 2: Extension of waiting time between the ANSam-DIS
When send from the G3 to the FAX machine of the G4, extend the waiting time between the
ANSam-DIS from 75ms to 450ms in expectation of the switching time of the echo canceller
of sending side. its default setting is "0: Valid"
<WSW60>
Selector No. Function Setting and Specifications
1
USB serial number (SN)
transmission enabled/disabled
0: USB serial number transmitted/ USB
serial number not transmitted
1: Frame length selection
2
Extension of waiting time
between the ANSam-DIS
0: Valid 1: Invalid
3
I
8
Not used.
Selector No. Function Setting and Specifications
1
I
8
Not used.