198
EVINRUDE ICON REMOTE CONTROL SYSTEM
COMPONENTS
Throttle Actuator
The throttle actu ator c onverts electronic signals
from the ESM into the mechanical motion required
to move the throttle of the outboard.
If th e throttle actua tor sen sor cannot de termine
throttle position, all LED indicat ors flash until con-
trol levers an d shif t actuato rs are in NEUTRAL.
Then, the NEUTRAL indicator LED for the engine
that has a fault flashes. The EMM:
If the throttle cannot move toward op en position,
the FOR WARD or REVERSE indicator LED
flashes (dep ending on gear p osition whe n fault
occurred).
If the throttle cannot move toward closed position,
all L ED indicators flash until control levers a nd
shift actuators are in NEUTRAL.
Then, the NEUTRAL indicator LED for th e engine
that has a fault flashes. The EMM:
ICON System Failsafe Mode
Fault code 108 will appear with another code that
explains why the eng ine(s) entered RPM reduc-
tion. The EMM:
Throttle Actuator 007302
Activates S.A.F.E.
Stores service code 108 and 149
Engine Monitor display: RPM reduction, ICON
fault 149, see dealer
Activates S.A.F.E.
Stores service code 108 and 150
Engine Monitor display: RPM reduction, ICON
fault 150, see dealer
Activates S.A.F.E.
Stores service code 108
Engine Monitor display: RPM reduction, ICON
fault 108, see dealer
To Next Page
Loading...
