75
SYSTEM ANALYSIS
DIAGNOSTIC PROCEDURES
5
• Check th e Engine Temperature Profile for evi-
dence of cold running or overheating.
• The Last Two Minutes pro file reports engine
run-time value s during the last two minu tes of
operation above 15 00 rpm. Info rmation is co l-
lected once per secon d. The ne west record is
first on the list. As ea ch ne w re cord is add ed,
the oldest record is removed.
The Engine Identity Report provides a sn ap-shot
of current engine and sensor conditions. From the
Identity screen, press the Print button. Next, press
Printer to print, or PDF File to save the report.
Operational Inspections
Run the ou tboard to confirm actual symp toms
before perfo rming any unnecessary procedures.
Inspection should include the following:
• Make sure the outboard can be cranked easily,
with no mechanical binding.
• Check the EMM LED Indicators for system sta-
tus information. Re fer to EMM LED INDICA-
TORS on p. 78.
Engine Temperature Profile 008588
Last Two Minutes Profile 008589
Engine Identity Report 008590
To Next Page
Loading...
