266
MIDSECTION
EXHAUST HOUSING SERVICE
EXHAUST HOUSING
SERVICE
Exhaust Housing Removal
Before removing the exhaust housing:
• Remove th e gearcase . Re fer to Ge arcase
GEARCASE RE MOVAL AND INSTALLATION
on p. 289.
• Remove the p owerhead. Refer to POWER-
HEAD REMOVAL on p. 219.
Remove and discard four lower mount screws.
Remove the steering arm ground lead and screw.
Remove two upper mount screws.
Remove the exhaust housing.
Lower Mount Service
Remove lower mount covers and inspect the
lower mounts.
If replacement is necessary, lubricate mount with
soapy water a nd carefully pry at b oth en ds to
remove.
32590
1. Ground lead (removed) 32589
006979
32578
To Next Page
Loading...
