267
MIDSECTION
EXHAUST HOUSING SERVICE
12
If re moved, coat the lower mount s with soap y
water and press into the exhaust housing with the
“OUTSIDE” mark facing outward.
Install t he mou nt covers. Ap ply Nut Lock to
screws, install washers and screws, and tighten to
a torque of 156 to 180 in. lbs. (18 to 20 N·m).
Exhaust Housing Installation
Bring the exhaust housing into position with th e
stern bracket.
Install four new lower mount screws with lock-
patch. Tighten screws to a torque of 38 to 45 ft.
lbs. (51 to 61 N·m).
Apply Ultra Lock to upper mount screws an d
tighten t o a to rque of 64 to 72 f t. lbs. ( 87 to 9 8
N·m).
23033
32579
1. Lower mount screws 32590
7716
To Next Page
Loading...
