321
GEARCASE – COUNTER ROTATION
SHIFTER, BEARING AND SEAL SERVICING
13
SHIFTER, BEARING AND
SEAL SERVICING
Shift Housing Disassembly
IMPORTANT: The shift housing and bearing are
serviced a s an assembly . If eithe r are worn or
damaged, replace the complete assembly.
Insert a suitable tool under one end o f the clutch
dog spring and remo ve it from its groove by
unwrapping it from ar ound the clutch dog. Dis-
card the spring.
Push the pin o ut of the clutch dog . Remove all
parts.
Remove the ge ar, thrust bearing, and thrust
washer from the shift housing.
IMPORTANT: The shif t h ousing support s th e
reverse gear on counter rotation gearcases.
Remove the shif t lever p in from the hou sing.
Remove shif t sh aft, cradle and shif t lever. Move
shifter detent as needed to help ease re moval of
parts.
A WARNING
Wear safety glasses to avoid injury.
1. Clutch dog spring 006887
1. Pin 006930
1. Gear
2. Thrust bearing
3. Thrust washer
006931
1. Pin 006861
A WARNING
Wear sa fety glasses t o av oid personal
injury. Th e dete nt ball and s pring and
come out with great force.
To Next Page
Loading...
