115
ELECTRICAL AND IGNITION
ELECTRIC STARTER SERVICING
6
ELECTRIC STARTER
SERVICING
Starter Removal
IMPORTANT: Do not clean the st arter drive
while the st arter motor and drive are in stalled on
the powerhe ad. Th e cleaning a gent could dra in
into the st arter motor, washing dirt from the drive
into the starter bearings and commutator.
Disconnect the battery cables at the battery.
Remove the starter positive (+) cable from post on
starter.
Remove the fou r frame and bracket mounting
screws. Lift and remove the starter.
Loosen the two nut s used to faste n the starter
bracket. Remove the nuts and bracket.
Remove t he screws, lock washers, and p inion
housing.
Starter Disassembly
Lift and remove the wave washer and bushing.
Place a n ap propriate-sized de ep socket on th e
spacer.
004181
30374
30373
30372
To Next Page
Loading...
