69
ENGINE MANAGEMENT MODULE (EMM)
DIAGNOSTIC SOFTWARE FUNCTIONS
4
Reports
Engine rep orts provide service records and can
be used to document the running history of an out-
board. Reviewing this info rmation can help iden-
tify or resolve some service issues.
Click the print button in a windo w of the diagnos-
tics software to print engine data, or to export the
information to a computer file.
Software Replacement
Engine Manag ement Sof tware is loaded into th e
EMM at the factory. Periodically, a new program
may be available to enhance the opera tion of an
outboard. Select Engine Software Update from
the Utilities menu and refer to the instructions pro-
vided with the program.
IMPORTANT: Software replacement requires
the use of Bootstrap Tool, P/N 586551. Install tool
between engine and boat harness key/stop switch
connectors as instructed by update program.
1. Print button
2. Print/Export options
008592
Engine Report data files
1. Exports button
2. Data files
008593
1. Software Update button 008594
002383
To Next Page
Loading...
