10
Z31900_00_01
Introduction
2.2 Limitation of Liability
All specifications and instructions in this manual have been compiled taking account of
applicable standards and regulations, the current state of technology and the experience
and insights we have gained over the years.
The manufacturer accepts no liability for damage due to:
• Failure to observe this manual.
• Improper use.
• Deployment of untrained personnel.
• Unauthorized modifications.
• Technical modifications.
• Use of unauthorized spare parts.
The actual scope of supply may differ from the explanations and depictions in this man-
ual in the case of special designs, take-up of additional ordering options, or as a result of
the latest technical modifications.
The undertakings agreed in the supply contract, as well as the manufacturer's Terms
and Conditions and Terms of Delivery, and the legal regulations applicable at the time of
the conclusion of the contract shall apply.
2.3 Copyright
This manual is protected by copyright and intended solely for internal use.
This manual must not be made available to third parties, duplicated in any manner or
form – whether in whole or in part – and the content must not be used and/or communi-
cated, except for internal purposes, without the written consent of the manufacturer.
Violation of the copyright will result in legal action for damages. We reserve the right to
assert further claims.
2.4 Warranty Terms
The warranty terms are included in the manufacturer's Terms and Conditions.
2.5 Customer Service
Our customer service division is available to provide technical information. See "Con-
tact" on page 121 for contact details.
In addition, our employees are always interested in acquiring new information and expe-
rience gained from practical application; such information and experience may help
improve our products.
To Next Page
Loading...
Need help?
General
