66
Z31900_00_01
Operation
9.3 Starting the Application Software
After turning on the device, the indicator lamp (see "Indicator Lamp" on page 46)
switches to orange, and the application software boots automatically. After a successful
initialization the indicator lamp switches to green, otherwise the indicator lamp switches
to red indicating an error has occurred.
The initialization display appears:
Figure 9.4 SampleXpress Device Initialization
9.3.1 Program Start
After starting the program several messages are displayed in the message display.
Figure 9.5 Message Display: Adapting cassette
Figure 9.6 Message Display: Scanning all samples
When no cassette has been inserted, the program displays a message prompting, that a
cassette should be inserted:
To Next Page
Loading...
Need help?
General
