7
Z31900_00_01
1 About
1.1 This Manual
This manual enables safe and efficient handling of the device.
This manual is an integral part of the device, and must be kept in close proximity to the
device where it is permanently accessible to personnel.
Before starting any work, the personnel must have read the manual thoroughly and
understood its contents. Compliance with all specified safety instructions and operating
instructions is vital to ensure safe operation.
In addition, local accident prevention regulations and general safety instructions must be
observed for the operational area of the device.
Illustrations in this manual are intended to facilitate basic understanding, and may differ
from the actual design.
This SampleXpress user manual must be kept with the device. In addition to the Sam-
pleXpress user manual, instructions concerning labor protection laws, operator regula-
tions tools and supplies must be available and adhered to.
1.2 Policy Statement
It is the policy of Bruker to improve products as new techniques and components
become available. Bruker reserves the right to change specifications at any time.
Every effort has been made to avoid errors in text and figure presentation in this publica-
tion. In order to produce useful and appropriate documentation, we welcome your com-
ments on this publication. Support engineers are advised to regularly check with Bruker
for updated information.
Bruker is committed to providing customers with inventive, high quality products and ser-
vices that are environmentally sound.
1.3 Symbols and Conventions
Safety instructions in this manual are marked with symbols. The safety instructions are
introduced using indicative words which express the extent of the hazard.
In order to avoid accidents, personal injury or damage to property, always observe safety
instructions and proceed with care.
DANGER
This combination of symbol and signal word indicates an immediately hazardous sit-
uation which could result in death or serious injury unless avoided.
To Next Page
Loading...
