100
Z31900_00_01
Maintenance
Press the Export device report to mass storage button.
A screen appears and the device report file is copied to the USB memory stick.
Figure 10.9 Export Device Report
Figure 10.10 Export Device Report
4. When the process is finished write down the name and the path of the log file (Fig-
ure 10.10).
i
The file is saved in the directory \Bruker\Automation\logs\ on the USB stick. The file
name consists of device name, model number, serial number, date (YYYYMMDD) and
time (hhmmss), e.g.
X:\Bruker\Automation\logs\SampleXpress_modelno_serialno_YYYYMMDD_hhmmss.log
5. Press the OK button.
6. Disconnect the USB memory stick from the device.
7. Send the file to the customer service.
To Next Page
Loading...
