117
Z31900_00_01
13 Dismantling and Disposal
Following the end of its useful life, the device must be dismantled and disposed of in
accordance with the environmental regulations.
i
Installation, initial commissioning, retrofitting, repairs, adjustments or dismantling of the
device must only be carried out by employees of the manufacturer or persons authorised
by the manufacturer.
13.1 Safety
Electrical System
WARNING
Electrical hazard from electrical shock!
A life threatening shock may result when the housing is open during operation.
f Disconnect the device from the electrical power supply before opening the device.
Use a voltmeter to verify that the device is not under power!
f Be sure that the power supply cannot be reconnected without notice.
f The housing must be closed during operation.