61
Z31900_00_01
9Operation
The SampleXPress is operated via the application control software or by the TopSpin/
Icon-NMR. In this chapter the application control software is described.
The application control software consists of a main screen and four touch screen but-
tons. This chapter provides an overview of the different displays and the operating steps
to be performed. Be sure to read the safety and related operational instructions in "Oper-
ation Overview" on page 57 before operating the device. The functions and the buttons
depend on the selected operation mode.
9.1 Operation Modes
The application software consists of three modes of operation:
Single Access Mode
In the Single Access Mode the cassette is used with the cover and the only way to fill the
casette is at the Operator Access Position. A correct assignment of sample and posi-
tion is only possible in this mode, which leads to high throughput operation.
The operating description in the following sections refer to this operation mode.
Random Access Mode
In the Random Access Mode it is possible to place the samples in any empty holder. The
cassette is not covered here. In this mode the position of the samples on the display may
differ from their actual position in the cassette, because samples can be inserted and
removed without program control.
Manual Mode
In Manual Mode the spectrometer is used without the SampleXpress device.
See also "Working in Manual Mode" on page 88.
To Next Page
Loading...
Need help?
General
