Bruker SampleXpress - Cleaning

101
Z31900_00_01
Maintenance
i
If the Information screen (Figure 10.3) does not appear, send the new file on the USB
memory stick back to the customer service. The file contains information about the
device.
10.8 Cleaning
10.8.1 Before Cleaning
1. Stop the submitted jobs in the IconNMR automation mode.
2. Stop the SampleXpress from doing any actions.
3. Switch the power off (see "Switching Off the Device" on page 59).
4. Disconnect the power supply (Figure 10.11/3).
Figure 10.11 Connections Right Side
1. Power Control from Control Panel
2. Fuse Cartridge
3. DC In (Future feature)
4. Power Supply
1
4
2
3