91
Z31900_00_01
Maintenance
Environmental protection
Observe the following environmental protection instructions during maintenance work:
• In respect to all lubrication points supplied manually with lubricant, remove any
escaping, used or surplus grease and dispose of in accordance with applicable local
regulations.
• Catch replaced oils in suitable containers and dispose of in accordance with appli-
cable local regulations.
10.2 Replacement Parts
Replacement parts must be exchanged by Bruker Service staff! The only exception is
the cassette.
Only original parts from Bruker are to be used for the SampleXpress. Use of any parts
other than from Bruker invalidates all warranty.
Parts which are returned to Bruker for repair or disposal must be accompanied by a
repair declaration (see "Repair Declaration" on page 157).
10.3 Preventative Maintenance
All parts in the SampleXpress have been designed to work reliably without routine pre-
ventative maintenance.
Part Number Description
H15040 BACS2 Main Unit Standard Complete
H15020 BACS2 Control Panel Complete
H15050 BACS2 Cassette 60 Standard Complete
HZ16216 BACS2 Casette Top Cover
Table 10.1 Bruker Replacement Parts
To Next Page
Loading...
