123
Z31900_00_01
Appendix A
A.1 Safety Notices
i
Installation, initial commissioning, retrofitting, repairs, adjustments or dismantling of the
device must only be carried out by employees of the manufacturer or persons authorised
by the manufacturer.
CAUTION
Accident hazard from bright LED or laser light!
Peering into the lighting system of optical sensors, e.g. bar code reader, may result in
temporary blinding of the eyes due to the bright light.
f Do not look into the ray of light.
f Switch off the equipment before maintenance work.
WARNING
Biological, chemical hazard!
Infection, contamination, or other health endangerment as a result of contact with
biological or chemical substances, e.g. from broken samples.
f Clean the device before maintenance work and/or returning to Bruker for repair.
f Prepare a list of materials in which the device came into contact with or measured.
f A signed confirmation of correctly carrying out cleaning/disinfection is required
from the customer. Without this confirmation the parts delivered for repair will be
rejected and returned to the customer.
To Next Page
Loading...
Need help?
General
