57
Z31900_00_01
8 Operation Overview
8.1 Safety
Improper Operation
8.1.1 Emergency Shutdown
In dangerous situations, it is vital to stop moving components as quickly as possible and
to switch off the power supply. In an emergency proceed as follows:
1. Immediately use the emergency stop device to trigger an emergency stop, whereas:
- All actuators are inactivated.
- All valves are opened.
- All motors stop running.
2. Notify a doctor and the fire brigade.
3. Notify those responsible for the area of use.
4. Switch off the mains switch and secure to prevent a restart.
5. Keep access routes clear for emergency service vehicles.
6. If warranted by the gravity of the emergency, notify the responsible authorities.
7. Delegate specialist personnel to rectify the fault.
8. Before the restart, check the device and ensure that all safety devices are installed
and fully functional.
WARNING
Danger of injury from improper operation!
Improper operation can result in serious injury and significant damage to property.
f Carry out all operating steps in accordance with the specifications and instruc-
tions in this manual.
f Before starting work, ensure that
- all covers and safety devices are installed and functioning properly.
- no persons are in the danger zone.
f Never disable or bypass safety devices during operation.
To Next Page
Loading...
Need help?
General
