103
Z31900_00_01
Maintenance
- Keep these surfaces clean.
10.8.5 Cleaning the Cassette
1. Remove the cassette.
2. Lift the cassette cover.
3. Clean the magazine with warm water and a damp lint-free cotton cloth or towel.
i
Let the cassette dry before using.
10.8.6 Other Cleaning Operations
For all other cleaning operations contact your authorised Bruker service personnel for
advice and support. It may be necessary to send in the device for a cleaning service.
No special precautions have been taken in SampleXpress to avoid contamination from a
leaking sample tube. Bruker accepts no responsibility for any damage which may occur
when samples are used containing radioactive or other hazardous materials.
In case of an accident with toxic, radioactive, explosive, or biologically active sub-
stances, the device and associated equipment must be cleaned in such a way that no
danger emanates from the device and associated equipment, especially for all unin-
formed personnel. If a device has to be cleaned of all remains of a substance for safety
reasons, contact your authorised service personnel for advice and support.
Note that in serious cases it may be necessary for the owner to exchange the device
with a new one, contact Bruker service.
Repair Declaration Form
Use the Repair Declaration Form, whenever a device might be exposed to hazardous
substances by customers, when it is to be returned to Bruker.
You will find the Repair Declaration Form in the appendix. "Repair Declaration" on page
157.
To Next Page
Loading...
Need help?
General
