BT Micro Owner’s Manual
108
Line Settings
The settings on this page have an effect on a line by line basis.
Individual features can be Enabled or Disabled for particular
lines that are connected to the system.
Equipped
The system assumes that available line interfaces have external
lines connected to them. If a line interface does not have an
exchange line connected, ensure correct system operation by
unequipping the line interface in system programming
Select this option to enable/disable lines connected to the
system.
Setting the option to Off, disables the specified line.
Outgoing Group
External lines can be grouped together in up to 2 Outgoing
Groups.
Each Outgoing Group is associated with a code. These codes
are 9 &, with Group 1 being associated with 9, etc.
Dialling a code selects a line from the associated Outgoing
Group.
This option allows you to select the required Group for the
selected line.
Use Answering Machine.
This feature allows you to set up an answering machine to
answer incoming calls. You can select which lines are to be
answered by the answering machine when it is turned on.
All messages received are stored in the answering machine,
which is controlled by extension 20 or dialling 737 to turn it on
and off from all extensions. Extension 20 can also customise
the greeting.
You can use it if you are not answering calls at lunch or at night,
or simply want to record messages from callers. If desired, you
can have this feature on permanently, so that calls, which are
not answered for a programmable period, are answered by the
Answering machine. The greeting may ask callers to dial an
extension number, in which case the call will be transferred
through to that extension.
Select this option to allow incoming calls only on the line to be
answered by the answering machine.
To Next Page
Loading...
Need help?
General
