BT Micro Owner’s Manual
37
If you are following the First Time Settings wizard, the final page
in the wizard sequence is displayed, which allows you to
confirm the settings.
If you have accessed this page from the General Settings
section of the Wireless Network page, click on the Confirm
Changes button to apply changes and return to the Wireless
Network page.
Confirm Wireless network changes
Once you have configured Wireless Address Authentication and
clicked on Next>, the following page is displayed:
This page confirms the configuration changes made to each
page in the wizard. If you are happy with these settings, click on
the Confirm Changes button. Configuration changes are applied
to the BT Micro and the Wireless Network page is displayed.
Date & Time Settings
Use this screen to program Time and Date settings for your
system.
Date
Use this field to enter the system Date - the time is in the
DDMMYY format, where DD is the day, MM is the month & YY
is the year.
For example, 3rd May 2006 = 030506
Time
Use this field to enter the system time - the time is in the 24-
hour clock format. Press Apply before exiting the screen.