BT Micro Owner’s Manual
113
Voice Mail Message Length
This is the maximum length of a message left in a Mailbox or a
Greeting for a Mailbox, Auto Attendant or Courtesy service.
Outgoing VoIP Calls
In normal operation to make an outgoing call a line access
code, 9 or 8, is dialled or a Line key is selected and the digits
are dialled. To make a call over an IP line the digit 8 must be
dialled or an IP Line key selected.
This feature is used to programme the BT Micro so that
outgoing calls are sent over the IP Lines independently of the
line access code dialled or the line selected. It is also possible
to select particular calls to go over IP lines.
Select Outgoing VoIP calls from the left-hand side menu. Four
options are displayed.
Normal Line selection
The default setting, Normal Line Selection means that a line
access digit, 9 or 8, is dialled to select the line the call is made
on. Nine is dialled to select Line 1 and 8 to select a VoIP line.
All Outgoing calls carried over VoIP
This option is selected if all external calls are to select the IP
line.
The line access code 9 or 8 must still be dialled, or a Line key
selected, to make an external call.
As soon as the first digit of the external number is dialled a free
IP line will be selected.
An option is then provided so that if the IP trunk is not available
or is busy the call will be placed over Line 1.
Select ‘All outgoing calls carried over VoIP’ and select ‘Next’.
The following screen is displayed: -
To Next Page
Loading...
Need help?
General