BT Micro Owner’s Manual
38
5 Using Your BT Micro Phone System
System Description
The BT Micro is an Integrated Communications System
supporting all your voice & data needs.
The BT Micro can accommodate 1 external PSTN line and 2 IP
lines. The PSTN line can be a standard line or a Featureline.
The BT Micro system can accommodate 4 wired
featurephones, standard phones and 4 cordless DECT sets.
The BT Micro featurephone has a simple-to-use menu-driven
interface.
A Door Intercom is available that can be programmed to ring
any extension. A Doorstrike output is also provided to activate
an automatic door opener. (door intercom utilises extn 23)
External Music-on-Hold may also be used. This is provided
using the optional Music-on Hold module. If installed it is also
connected to an extension position.
Introduction to your BT Micro Phones
There are four wired and four cordless extension positions
available on the BT Micro.
The wired positions can be equipped with a featurephone or
standard telephone sets.
The cordless positions can be equipped with the proprietary
DECT phone or a standard DECT phone.
The proprietary featurephone and DECT cordless phone are
designed to simplify the use of the system by providing
integrated features on the phones.
Note
If a door intercom is installed it uses a wired extension position (extension 23)
thus reducing the wired telephones to three. See page 99 for instructions on
programming the door intercom.
Installing the External Music-on-Hold module also uses an extension position.
If both are installed the number of available wired telephones is reduced to
two. See page 100 for instructions on programming the external Music on
Hold module
To Next Page
Loading...
Need help?
General