BT Micro Owner’s Manual
109
Advanced Options
Dial Tone Detect
This option requires the system to detect dial tone before calls
can be made.
If set to FALSE, this feature prevents the system from dropping
the line when dial tone has not been detected.
In this case, the line is released if no digit is dialled until the
expiration of a timer.
CDS (Caller ID) Detection
This option enables the system to detect incoming caller ID
information received from the network and to display it on
featurephones.
Distinctive Ring
If the distinctive ringing facility is required it is turned on here.
See page 71 for a detailed description of the facility.
Incoming Call Diverts
You can use this feature to Divert (On Busy, No Reply or All
Calls) calls received on a particular line to an extension or an
answering machine.
For each incoming line (Line 1, IP Lines 1 & 2) you can define
the extension to divert the call to for the cases of No Reply,
Busy & All Calls. Divert on Busy only applies if the answering
extensions are busy on another call. It does not apply if the line
To Next Page
Loading...
Need help?
General