BT Micro Owner’s Manual
208
(5) Check your Wireless PC settings
The following procedure is for a PC with an Intel (PRO) Wireless
Network adapter that has been set up for WPA security.
For other Wireless Network adapters, consult the manufacturer’s user
manual. Note that some older wireless adapters do not support WPA.
Click start
Click Control Panel
Double click Network Connections icon
Double click Wireless Network Connection
Under General tab
click Properties
Select Wireless Network tab
highlight the network name noted in (4c)
click Properties
Under Association tab
set Network Association to WPA-PSK
set Data Encryption to TKIP
re-enter the Network Key (this is the Pass Phrase noted in (4f))
confirm the Network Key
click OK
The Diagnostics Menu
The following menu items are used to diagnose problems on
the BT Micro.
ADSL Test
The ADSL Test is used to identify problems with your Internet
connection.
When should I run an ADSL Test?
If you contact your Internet Service Provider to report a
connection problem, they may ask you to run an ADSL Test so
that you can give their support staff additional information.
To Next Page
Loading...
Need help?
General