BT Micro - Programming Additional System Options

BT Micro Owner’s Manual
183
To programme ‘Lines to be answered by the Answering
machine
From the Programming Extension, press the PROGRAMME
Key
Press the Scroll Down Key (v) until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ’Lines’.
Press the Scroll Down Key () until ‘Answering Machine’ is
displayed.
Select ‘Answering Machine’
Select the lines to be answered by the Answering machine. The
lines that will be answered are indicated by a .
Press the Hands-free Key to finish programming.
On Power Up the answering machine is associated with all
lines.
To set the time a call will ring before the Answering Machine
answers
From the Programming Extension, press the PROGRAMME
Key
Press the Scroll Down Key () until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ‘System’.
Press the Scroll Down Key () until ‘Timers’ is displayed.
Select ‘Timers’.
Select ‘Answering Machine Delay ’
Enter the time. The default is 010 seconds.
Press the Hands-free Key to finish programming.
Programming Additional System Options
Doorstrike
To set up a Door Intercom on your System
From the Programming Extension, press the PROGRAMME
Key
Press the Scroll Down Key () until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ‘System’.
Select ‘Door Intercom'.
Select ‘Door Intercom equipped’.
Press the Hands-free Key to finish programming.
To programme which extensions can operate the Doorstrike
From the Programming Extension, press the PROGRAMME
Key
Press the Scroll Down Key () until ‘System programming’ is
displayed.
Select ‘System programming’.