BT Micro Owner’s Manual
143
Security Logging
Select “Security Logging …” from the left-hand side Firewall
sub-menu.
The following page is displayed
Logging is enabled by default for Session Logging, Blocking
Logging and Intrusion Logging.
To disable all logging:
Select “Disable Security Logging”
Session Logging, Blocking Logging and Intrusion Logging.
To disable any of the above
Select “Disable”
One of eight logging levels for reporting can be selected from
the drop down menu
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debug
The output can be directed to the Console or the Event Log.
Application Level Gateways
There are certain applications that NAT and Firewall
configurations cannot manage. In many cases, ALGs
(Application Level Gateways) are needed to translate and
transport packets correctly. An ALG provides a service for a
specific application such as FTP (File Transfer Protocol).
To Next Page
Loading...
Need help?
General