EasyManuals Logo

BT Micro User Manual

BT Micro
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #213 background imageLoading...
Page #213 background image
BT Micro Owners Manual
213
Is there any way of retrieving deleted messages?...
Unfortunately there is no facility to retrieve DELETED Voicemail
messages.
Noise from the Featurephone speaker.
There is an option on the BT Micro system to play the music you
provide for music on hold through the featurephone speakers
when the featurephone is not being used. This feature can only
be used when you provide an external music source. If the
feature is turned on and an external music source is not
provided the featurephone speakers may make a low level
noise. To stop this, program the feature off. Do this by
selecting the Program key on the featurephone, scroll down
and select 'Background music' and select the 'OFF' option.
Extension 20 keeps ringing .
Extension 20 can be called by dialling '0' from any other
extension. Consequently, if when making a call from the
system the caller does not dial the line access digit but simply
dials the telephone number beginning with a '0' this will call
extension 20. The problem is more likely to occur when data
devices, fax machines, PDQ's, Sky Digital boxes etc., which
automatically dial out, are not programmed with the line
access digit. The display on extension 20 will show which
extension is calling.
Featurephone not working in another extension
If the BT Micro system wiring has been extended a
featurephone can only be connected to any of the other hard
wired extensions if the correct wires have been extended
through to the telephone socket. The featurephone requires
more wires to work than an ordinary telephone. See page 16 for
wiring instructions.
Featurephone Handsfree does not appear to work
The featurephone has probably been programmed for Headset
use. Select the Program key and scroll to Headset mode. Select
Headset mode and select Headset off. Headset mode should
only be set on when a headset is connected to the headset
connection on the featurephone and this is to be used instead of
the handset

Table of Contents

Other manuals for BT Micro

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BT Micro and is the answer not in the manual?

BT Micro Specifications

General IconGeneral
Bluetooth VersionBluetooth 5.0
Frequency Range20Hz - 20kHz
ConnectivityBluetooth
MicrophonesOmnidirectional
CompatibilityiOS, Android, Windows, macOS