BT Micro Owner’s Manual
63
3. Key the extension number, or
Key the external number, (including line access code 9) followed
by #.
Cancel Incoming Call Divert - on busy
1. Lift handset or use hands-free if available
2. Key 793 followed by the line number (1-3).
Divert calls when an incoming call is not answered (after four
rings)
1. Lift handset or use hands-free if available
2. Key 794 followed by the line number (1-3)
3. Key the extension number, or
4. Key the external phone number (including line access
code, e.g. 9)
5. Followed by #.
Cancel Incoming Call Divert - on no answer
1. Lift handset or use hands-free if available
2. Key 794 followed by the line number (1 - 3).
Programming and dialling speed dial numbers
If you have a standard telephone, you can programme up to 10
Personal Speed Dial numbers.
To programme a personal speed dial number
1. Lift the handset, or press the Hands-free Key, if available.
2. Dial the code 75.
3. Enter the location (01 - 30) where you want to store the
number.
4. Dial the number you want to store.
5. Go on-hook.
Note
The line access codes 'e.g. 9' is not required
To dial a personal speed dial number
1. Lift the handset, or press the Hands-free Key, if available.
2. Dial the code 74.
3. Dial the location (01 - 30) of the number you wish to
access. The number is automatically dialled.
To dial a system speed dial number
Dial the location code (401 – 499) of the number you wish to
access. The number is automatically dialled.
Voicemail
Turn on your voicemail
When you are allocated a voice mailbox ‘Divert on no answer’ is
automatically set to your voice mailbox.
The mailbox code is 710.
To divert all your calls to your voicemail Key 732 followed by
710.
To divert on busy to your voicemail Key 733 followed by 710.
To Next Page
Loading...
Need help?
General