BT Micro Owner’s Manual
88
3. This page allows you to enable or disable password
protection. Protection is already enabled by default. Click
Next>. The following page is displayed:
This page displays the current username and password
settings. Type your own unique username and password in the
relevant boxes. They can be any combination of letters or
numbers with a maximum of 20 characters. The default setting
uses admin for both the username and password. We
recommend that you do not set the same character
combination for both username and password.
4. Click Next>. The following page is displayed:
This page confirms that password protection is enabled and
displays the username that will be required in order to access
the web pages. If you are happy with these settings, click
Confirm Changes. The Enter Network Password login box is
displayed. You need to login to the web pages using your new
username and password. For details of how to do this, see
Accessing the Web pages on page 22.
Disabling password protection
If you do not want to use password protection, follow the
instructions in ‘Setting your username and password’ on page
87 and at Step 3, select Disable and then click Next>. The
following page is displayed.
To Next Page
Loading...
Need help?
General