2002 Buell P3: Chassis 2-41
HOME
8. See Figure 2-64. Remove the damper assembly, lock
piece and the rebound spring from the slider tube.
CAUTION
Do not to scratch the slide pipe or the outer tube.
Scratched tubes may leak fork oil and then must be
replaced.
9. See Figure 2-65. Remove the dust seal and the retaining
ring from the slider tube.
10. See Figure 2-66. Pull the slider tube out of the slider
assembly. Remove oil seal, back-up ring and guide bush-
ing.
Figure 2-64. Removing Damper
Figure 2-65. Removing Dust Seal
Figure 2-66. Removing Slider Tube
3772
3775
3773
Oil Seal
Backup
Ring
Guide
Bushing
To Next Page
Loading...
