2002 Buell P3: Chassis 2-45
HOME
8. See Figure 2-76. Install center bolt and washer.
9. Coat the guide bushing with fork oil or sealing grease.
10. See Figure 2-77. Install guide bushing onto the slide
pipe.
11. See Figure 2-78. Wrap the end of the slide pipe and the
slide bushing channel with tape to avoid damaging the oil
seal lip when installing.
Figure 2-76. Install Center Bolt
Figure 2-77. Install Guide Bushing
Figure 2-78. Slider Tube Protection
3793
3774
3781
To Next Page
Loading...
